FAQ

Home / FAQ

We are always happy to help you.
If you don’t find the items you need or if you have any concerns,please feel free to contact us.

Yes. Please go to “Contact” page and fill out the required form.

You may purchase from 1 carton (15pcs). 1 pallet is 50 cartons. Bulk discount is available.

We recommend to use Clay Oven to warm the clay. Set temperature around 60℃ and heat 30min to 60min.

Keep the clay at a cooler and less humid room avoid direct sunlight.

We recommend to use it within 6 to 12 months.

The clays are used for modeling of automotive and other 3D modeling.

Yes. Our clay is recyclable. “Clay Shaper” reproduces the clay.

Kochi Clays are all sulfur free. They can be disposed by incineration.

Yes. Please go to “Contact” page and fill out the required form.

You may purchase from 1 pc.

Yes. Kochi Clay Tools and ID Clay Tools can be. Please contact us for the details.

Yes. Kochi Clay Tools and ID Clay Tools can be. Please contact us for the details.

Yes. Please prepare your detailed requirement and contact us.

Steel tools can be easily sharpened with a bench stone (whetstone)

Yes. Please go to “Contact” page and fill out the required form.

Basically, you may purchase from 1 carton. Some tapes have different minimum order qty., such as 20 rolls or 3 rolls.   In those cases, we put a note on its description.

Keep them at a cooler and less humid room and avoid direct sunlight.

Under the proper circumstance, it will last about 2 years.

Yes. Please go to “Contact” page and fill out the required form.

Basically, you may purchase from 1 roll. Some items have different minimum order qty., such as 50 sheets or 2 sheets.   In those cases, we put a note on its description.

Remove a protection film carefully, confirm the adhesive surface and apply on.

Keep it at a cooler and less humid room and avoid direct sunlight.

We recommend to use within about 6 months.